Low Voltage - Power Distribution Panel

Q-Tec Switchgear W.L.L. offers a wide range of Power Distribution Panels that are precision designed for the power distribution in different sections of an industry, big building, etc. where only short circuit protection and overload protection are required. These protective devices can be fitted with different protective relays which can trip the CB against various types of faults.

  • Rated insulation voltage up to 1000V
  • Main busbars rated from 630A to 4000A, 50KA for 3 Sec
  • Neutral busbars are rated up to 100% of the main busbar and Earth busbars are rated up to 100% of the Neutral busbar
  • Ambient temperature up to 50 °C
  • Three useful height sizes: 1600, 1800 and 2000 mm, to which the H=100 mm plinth with removable front/rear flanges must be added ,Four useful working width sizes: 390, 600, 800 and 1000 mm
  • Form 2, 3 and 4 segregation compartments can be created inside 500, 700 and 900 mm depth
  • Modular Construction & High Mechanical Endurance
  • Field testing from licensed test engineer (Optional)
  • Various Control and Automation options possible
  • Major components are from European Union
  • Protection Class up to IP54 & can be extended upon request
  • Cable entry possible from top, bottom and rear side
  • Extendable on both sides
  • Aluminum gland plates (Optional)
  • RAL 7035/RAL 7032 color as standard, other colors on request
Compliance with Standard : CEI EN 60439-1/IEC 61439 -1 -2
IP protection class : 31 without door ,41 without door and accessories
65 with door
IK mechanical impact rating : IK09 with glass door : IK10 with blind door
Rated service voltage Ue : up to 1000 V
Rated insulation voltage Ui : up to 1000 V
Rated frequency : 50-60 Hz
Rated impulse withstand voltage Uimp : 8 kV
Rated current In : Up to 6300 A
Rated short-circuit short-time withstand current Icw


Up to 105 kA
Rated peak short-circuit current Ipk


Up to 254 kA
Designed by blosssoms, Pune, India